Products

UTECTAL-1 Black

< >

Industries : UTECTAL-1 Black

Send Inquiry    Chat Now

Product description

General Information

UTECTAL-1 is a polyacetal-copolymer, commonly known as POM and Acetal. POM is one of the most important engineering plastics with excellent mechanical properties, low water absorption, high wear resistance, high dimensional stability and good chemical resistance. UTECTAL-1 is used in mineral oils, water-based fire-resistant pressure fluids (HFA, HFB, HFC) and is suitable for applications in contact with foodstuff.


Physical properties
Colour:                                                                    Black
Hardness at 20°:                     DIN 53505   Shore D    81
Density:                                 DIN 53479   g/cm3       1.41
Tensile strength:                     DIN 53504   N/mm2     > 65
Elongation at break:                DIN 53504   %             > 40
Modulus of elasticity:               DIN 53457   N/mm²      2400
Water absorption to saturation: ASTM D570  %            < 0.08
Water absorption in 24h:          ASTM D570  %            < 0.02
Compr. strength at 1% deform.: ASTM D695 N/mm²     100
Min. service temperature:                            °C            -50
Max. service temperature:                           °C            +100

Remark
All test methods and values mentioned above are corresponding to ASTM or DIN standards and have been
tested on standardized plates in the laboratory. All tests are made under laboratory conditions.

Previous article:UTECMID-1 Black
Next article:UTECRUBBER-HN(HT)

Inquiry

You have not entered the mobile phone number or the entered mobile phone number is in wrong format!

Please enter the E-mail address in right format!

No empty

Copyright © UTEC Sealing Solutions. | Copyright - 2024 All Rights Reserved.

Products

UTECTAL-1 Black

Basic Information

Product description

General Information

UTECTAL-1 is a polyacetal-copolymer, commonly known as POM and Acetal. POM is one of the most important engineering plastics with excellent mechanical properties, low water absorption, high wear resistance, high dimensional stability and good chemical resistance. UTECTAL-1 is used in mineral oils, water-based fire-resistant pressure fluids (HFA, HFB, HFC) and is suitable for applications in contact with foodstuff.


Physical properties
Colour:                                                                    Black
Hardness at 20°:                     DIN 53505   Shore D    81
Density:                                 DIN 53479   g/cm3       1.41
Tensile strength:                     DIN 53504   N/mm2     > 65
Elongation at break:                DIN 53504   %             > 40
Modulus of elasticity:               DIN 53457   N/mm²      2400
Water absorption to saturation: ASTM D570  %            < 0.08
Water absorption in 24h:          ASTM D570  %            < 0.02
Compr. strength at 1% deform.: ASTM D695 N/mm²     100
Min. service temperature:                            °C            -50
Max. service temperature:                           °C            +100

Remark
All test methods and values mentioned above are corresponding to ASTM or DIN standards and have been
tested on standardized plates in the laboratory. All tests are made under laboratory conditions.

Previous article:UTECMID-1 BlackNext article:UTECRUBBER-HN(HT)